TLR 8ight XT / XT-E 1/8 Truggy Race Kit, TLR04009
Features
- Suspension flex is now tuneable with all new suspension arms able to accept stiffener plates
- Suspension geometry has been improved
- Hard anodized 3mm wide 7075 T-6 aluminium chassis
- Build time of 3-5 hours
- Increased durability from larger pinion bearing in front and rear
- Electric or nitro running items all included in the one box
- Improved stability and steering from the cab forward body design style that increases downforce
- For nitro set-ups there is a flex reducing large engine mount that eliminates chassis fatigue on high traction race surfaces
- Easily adjustable pinion sizing on the one-piece aluminium motor mount for electric motors
- Adjustable spindle height from 17.5 deg castor blocks
- Threaded bleeder holes on machined aluminium shock caps ensuring consistent and easy bleeding of oil
- Better driving balance with weight moved forward in the chassis
- Altered front and rear diff case allowing easier differential access without the need to remove bulkheads
- New chassis side guards designed for an even better fit to the chassis body
- Steering rack has been redesigned to allow increased Ackerman adjustments plus an improved servo saver eliminates bell crank bins occurring when under high loads
- 7075-T6 machined aluminium shock towers have been redesigned with updated camber link holes
- Modified centre driveshaft angles placed equally front to rear giving more of a 4WD feel
- Radio tray has been updated and battery box is LiPo/Li-ion compatible
- Lightened shocks have been optimized and give a decreased centre of gravity and lowered the weight to the car
- Adjustable length links on the new sway bar system enable improved equalization of each side of the sway bar as well as centring collars to keep sway bar positions optimised
- Very even throttle/brake feel on the actuator with ball bearings used to smooth out acceleration/deceleration
- Agile handling and superb grip from shorter wheelbase
- Large bearing spindles and carriers
What you need
- Motor
- Electronic Speed Control
- Servo
- Radio System
- Charger
- Battery
- Paint
- Tools
- CA Glue
Specs
- Type:
- Nitro/Electric 4WD Truggy
- Kit
- 1/8
- 21.1 in (535mm)
- 16.6 in (421mm)
- 7.3 in (185mm)
- 9.0 lb (4.1kg)
- 1.6 in (40mm)
- 14.7 in (373mm)
- 15.8 in (402mm)
- 15.8 in (402mm)
- 15.8 in (402mm)
- 3mm, 7075 T-6 Aluminum, Hard Anodized
- Independent
- Aluminum Oil Filled
- 4WD
- Sealed viscous filled gear differential
- 13T Clutch Bell
- 48T
- MOD1
- 4.5:1
- 16.6:1
- No
- No
- 8XT Unpainted
- Yes
- 150cc
- Closed Course Competition
- Yes
- 3-5 Hours
Completion Level:
Scale:
Length:
Width:
Height:
Weight:
Ground Clearance:
Wheelbase:
Track:
Front Track:
Rear Track:
Chassis:
Suspension:
Shock Type:
Drivetrain:
Differential:
Pinion:
Spur Gear:
Gear Pitch:
Internal Gear Ratio:
Final Drive Ratio:
Speed Control Included:
Servos Included:
Body:
Ball Bearings:
Fuel Tank Capacity:
Recommended Environment:
Is Assembly Required:
Approx. Assembly Time:
Reviews
There are no reviews yet.