TLR 8ight-X Elite 1/8 Competition Buggy Kit, TLR04010
Features
- Ready to race at Pro level
- Increased stability from 7075 3mm aluminium chassis
- Rear CVAs have been updated to give more rear grip and help tracking in rough conditions
- Smoother steering response provided by updated aluminium front brace
- Throttle servo is rigidly mounted to updated radio tray to avoid flex associated with floating the servo out from the centre differential
- Front universals have been updated to smooth and aid the flow of your turns in bumpy track conditions
- Accessibility to diff has been improved
- Easily maintained quick-change one-piece engine mount
- Improved high speed turning stability with +1 hexes on rear of 8IGHT-X ELITE
- Design on suspension arms allows for stiffener plates to be attached giving racers the ability to tune how much suspension flex they want
- Updated wing and polycarbonate wing that meet IFMAR specs plus a 10mm wing grip for increased rear grip
- Steering rack that has an improved servo saver that eliminates bellcrank bind when subjected to high loads, and, allows more Ackerman adjustments
- Updated camber link holes on the machined aluminium 7075-T6 shock towers that were previously available on the 8XE
- Bleeder shock caps allow consistently easy bleeding of oil with new bladders included that handle bumps a lot better
- Enhanced shocks that lower the weight of the car and decrease the centre of gravity that can be set up using either 3.5mm or 4.0mm shock shafts
- Easier setting changes and body installation enabled by updated cut lines on the cab-forward style body that helps overall downforce and stability as well as improved steering
- Heightened 4WD feel through an equalized driveline
- Suspension geometry has been improved
- Durability increased through larger pinion bearing
- Collars on the sway bar system eliminated side to side play and give a more consistent suspension package
- Improved chassis side guard fit onto the main chassis
- Spindle height can be adjusted up or down through the adjustable castor blocks allowing you to increase or decrease your high-speed stability
What you need
- 6-Channel Radio System
- 1/8 Scale Brushless High Speed/Torque, HV Digital Servo
- 7.4V 3200MAh LiPo battery
- Compatible charger
- Fuel and fuel bottle
- Shock Shaft Pliers/Multi-Tool
- Dynamite® Nitro Engine Heater 12V DC
Specs
- Type
- 1/8 Nitro 4WD Buggy
- Completion Level
- Kit
- Scale
- 1/8
- Length
- 19.4 in (494mm)
- Width
- 12.1 in (308mm)
- Height
- 7.1 in (180mm)
- Weight
- Varies on equipment used
- Ground Clearance
- 2.4 in (60mm)
- Wheelbase
- 12.8 in – 13 in (326mm-329mm)
- Track
- 12.1 in (308mm)
- Front Track
- 12.1 in (308mm)
- Rear Track
- 12.1 in (306.5mm)
- Chassis
- 3mm, 7075 T-6 Aluminum, Hard Anodized
- Suspension
- Independent
- Shock Type
- Aluminum Oil Filled
- Drivetrain
- 4WD
- Differential
- Sealed viscous filled gear differential
- Wheel Type
- Dish
- Wheel Diameter
- 3.3″ (83.5mm)
- Wheel Width
- 1.7″ (42mm)
- Engine Size
- Engine not included-Design fits .21-.31 size engine
- Pinion
- 15T
- Spur Gear
- 48T
- Gear Pitch
- MOD1
- Internal Gear Ratio
- 3.23:1
- Final Drive Ratio
- 11.9:1
- Brakes
- Semi-Metallic Pad with Steel Disc
- Body
- 8XE Unpainted
- Ball Bearings
- Yes
- Fuel Tank Capacity
- 125CC (4.2oz)
- Experience Level
- Advanced
- Recommended Environment
- Closed Course Competition
- Is Assembly Required
- Yes
- Approx Assembly Time
- 3-5 Hours
Reviews
There are no reviews yet.