TLR 22 5.0 DC 1/10 Race Roller Buggy, TLR03012
- 12mm Big Bore G3 Shocks
- Gear differential is low maintenance
- Race Roller that’s been pre-assembled
- All new inner rear pivots and rear hubs
- Steering geometry has been revamped with a smoother feel at high speed and off-centre and increased low speed steering for 180’s and tight racing tracks
- Heavy-duty Super Slipper (SHDS)
- Aluminium 2mm chassis expertly combines rigidity and flex to give you optimized balance, bounce-free landings and smooth cornering
- Pre-cut 22 5.0 clear body
- Front camber block has 3 positions
- Increased steering provided by TLR front wing in high-speed turns whilst on power which also makes corner approach steering smoother
- Diff heights are adjustable from 0mm, +1mm, +1.75mm, +2.5mm to +3.5mm to optimise bone plunge for different grip levels, axle heights and ride heights
- Centre adjustment for front roll
- Battery hold down system is all new
- Composites have been optimised
- TLR 6.5” rear wing in super durable 1.2mm polycarbonate
- Mount for built-in motor fan
- Motor position shifted 20mm+ forward due to laydown 3-gear transmission giving more balanced and centralized position
- Metric hardware used throughout making replacements easier to find and limiting the number of tools required for maintenance
- Radio System
- Motor
- Electronic Speed Control
- Servos
- LiPo Battery
- Charger
- Completion Level
- Race Roller
- Scale
- 1/10
- Length
- 15.0 in (382mm)
- Width
- 9.8 in (250mm)
- Height
- 5.8 in (148mm)
- Wheelbase
- 11.0 in(280mm)
- Track
- 9.8 in (250mm)
- Front Track
- 9.8 in (248.5mm)
- Rear Track
- 9.8 in (250mm)
- Chassis
- 2mm Milled Plate, 7075-T6 Aluminum
- Suspension
- Lower A-Arm, Upper Adjustable Link
- Shock Type
- 12mm Big Bore, Oil Filled
- Drivetrain
- 2WD
- Differential
- Oil Filled, Bevel Gear
- Wheel Type
- 22 Dish, 12mm Hex, Yellow
- Wheel Diameter
- 2.2 in (56mm)
- Spur Gear
- 78T, 72T
- Gear Pitch
- 48-pitch
- Internal Gear Ratio
- 2.43:1
- Speed Control Included
- No
- Servos Included
- No
- Brakes
- Controlled via Motor/ESC
- Body
- 22 5.0 Cab Forward, 0.8mm LW
- Ball Bearings
- Full Rubber Sealed
- Experience Level
- Intermediate
- Recommended Environment
- Closed Course Competition
- Is Assembly Required
- Yes
- Approx. Assembly Time
- 1-3 Hours
Reviews
There are no reviews yet.