Hangar 9 Christen Eagle II 90 RC Plane, ARF, HAN5010
Features
- Constructed from lightweight balsa and plywood
- Great scale outline
- Bright Eagle UltraCote trim scheme
- Comes with painted fiberglass cowl and wheel pants
- Can accomodate glow or electric power
- Accessible top hatch
- Comes with cockpit details and pilot figure
- Hardware included
- Comes with wing transport frames
What you need
- 4+ channel transmitter
- Receiver
Gas Setup
- Engine
- Receiver battery
- 5 x standard servos
- Propeller
- Glow plug
- Fuel
Electric Setup
- Motor
- ESC
- 4 x standard servos
- 2 x 4000mah+ LiPo batteries
- Compatible charger
- Propeller
Specs
- Wingspan
- 54.0 in (137 cm)
- Overall Length
- 50.8 in (129 cm)
- Wing Area
- 878 sq. in. (56.7 sq. dm.)
- Flying Weight
- 8.50 – 10.0 lb (3.85 – 4.50 kg)
- Engine Size
- .75 – .91 2-stroke; 1.15 – 1.25 4-stroke
- Motor Size
- Power 90
- Radio
- 4 channel radio system minimum
- Servos
- 5 standard size servos required (4 for EP)
- Trim Scheme Colors
- UltraCote White, Deep Blue, Orange, Black, Smoke Purple, Deep Red, Flame Red, Dark Yellow, Bright Yellow
- CG (center of gravity)
- 5 to 5-1/2 inches behind the leading edge of the upper wing at center
- Wing Loading
- 22.3-26.2 oz/sq ft (67.9-79.3 g/sq dm)
- Prop Size
- Saito 125: 16 x 6; Power 90: 17 x 8E
- Spinner Size
- 2.75 inch
- Speed Control
- 75-Amp
- Recommended Battery
- 14.8V 4000mAh 4S 30C LiPo x2
- Flaps
- No
- Retracts
- No
- Control Throw (Ailerons)
- Low: 15mm up/down, 33% expo; High: 22mm up/down, 42% expo
- Control Throw (Elevator)
- Low: 25mm up/down, 30% expo; High: 35mm up/down, 42% expo
- Control Throw (Rudder)
- Low: 35mm right/left, 35% expo; High: 45mm right/left, 45% expo
- Minimum Age Recommendation
- 14 years
- Experience Level
- Intermediate
- Recommended Environment
- Outdoor
- Assembly Time
- 10-15 Hours
- Is Assembly Required
- Yes
Reviews
There are no reviews yet.