E-Flite PA-20 Pacer 10e RC Plane, ARF, EFL2790
Features
- Comes with accurate lines and scale proportions
- Constructed from laser-cut balsa and plywood
- Covered in Hangar 9 UltraCote covering
- Can accomodate the E-Flite Power 10 motor
- Fiberglass cowl and wheel pants come pre-painted
- Cockpit details (pilot not included)
- Comes with four-channel control with optional flaps
- Practical two-piece, plug-in wing
- Accurate scale wire landing gear assembly
- Accessible belly hatch
What you need
- Transmitter. We recommend the Spektrum DX6 (SPM6700AU1)
- Receiver. We recommend the Spektrum AR610 (SPMAR610)
- Servos. We recommend the E-Flite DS76 servos (EFLRDS76)
- Motor. We recommend the E-Flite Power 10 (EFLM4010A)
- ESC. We recommend the E-Flite 40A ESC (EFLA1040B)
- Propeller. We recommend the APC 11 x 7E (APCLP11070E)
- Spinner. We recommend the E-Flite 1.75″ spinner (EFLSP175)
- Battery. We recommend the Dualsky 1800mAh ECO-S (DSBXP18003ECO)
- Charger. We recommend the Advantage ONE 406 Charger (ORI30220)
Specs
- Wingspan
- 51.0 in (1300mm)
- Overall Length
- 36.3 in (920mm)
- Wing Area
- 451 sq. in. (29.1 sq. dm.)
- Flying Weight
- 46.4–48.0 oz (1300–1360 g)
- Motor Size
- 10-size brushless outrunner
- Radio
- 4+ channel radio system
- Servos
- (4) digital sub-micro servos required, (6) required for flap operation
- Trim Scheme Colors
- UltraCote True Red (U866), Black (U874)
- CG (center of gravity)
- 2-3/16 to 2-3/4 in (55-70mm) back from the leading edge of wing
- Prop Size
- 10 x 5 – 12 x 6 thin electric propeller
- Spinner Size
- 1-3/4 in (45mm)
- Speed Control
- 40-amp brushless
- Recommended Battery
- 11.1V 3S 1800-2200mAh LiPo
- Flaps
- Optional
- Retracts
- No
- Control Throw (Ailerons)
- Low: 11/32 in (9mm) up, 9/32 in (7mm) down, 15% expo; High: 15/32 in (12mm) up, 11/32 in (9mm) down, 25% expo
- Control Throw (Elevator)
- Low: 1/2 in (13mm) up/down, 20% expo; High: 25/32 in (20mm) up/down, 30% expo
- Control Throw (Rudder)
- Low: 11/16 in (17mm) right/left, 15% expo; 1 in (25mm) right/left, 25% expo
- Control Throw (Flaps)
- Mid: 1/2 in (12mm); Full: 1 in (25mm)
- Minimum Age Recommendation
- 14 years
- Experience Level
- Intermediate
- Recommended Environment
- Outdoor
- Assembly Time
- 10-15 Hours
- Is Assembly Required
- Yes
Reviews
There are no reviews yet.