Axial Wraith 1.9 Crawler, RTR, Black, AXI90074T2
- Servo mounted on chassis for a realistic look
- Forward battery mount position on rigid tube chassis
- Adjustable battery tray and easily accessible electronics
- All new body design includes a grill, fender, LED lights, radiator and V8 engine features
- SRX200 Receiver and STX2 Transmitter both from Spektrum
- TSX45 metal geared waterproof servo by Tactic
- XD229 Machete crawl wheels fitted with fully licensed 1.9 Nitto Trail Grappler M/T tyres
- Equipped drive shafts are WB8 HD Wildboar’s.
- Improved rough terrain handling and extra clearance provided by skid plate/boatsides that assist you to slip over/past/through obstacles
- 32-pitch gearing on the dual slipper clutch
- 3S LiPo compatible Dynamite ESC with drag brake that can be easily switched with a jumper over to NiMh
- Better driveshaft angles and added ground clearance achieved with hi-pinion AR44 axles
- Equipped with an integrated cooling fan the 35T electric brushed motor is ideal for extended use
- Torque twist and axle steer is reduced through the 4-link design used on the rear suspension geometry
- Transmission is a compact AX10 unit
- Includes two separate scale detailed turbochargers that can be installed under the hood for that little bit extra scale realism (installation hardware will need to be purchased separately)
- 2-3 Cell LiPo or 5-9 Cell NiMH/NiCd battery with IC3/EC3 connector
- Compatible battery charger
- (4) AA Alkaline batteries
- Type
- Crawler
- Scale
- 1/10
- Length
- 17.8″ (451.6mm)
- Width
- 8.8″ (223.3mm)
- Height
- 8.8″ (223.3mm)
- Ground Clearance
- 2.73″ (69.4mm)
- Wheelbase
- 12.13″ (308mm)
- Weight
- 4.65lb (2.1kg)
- Chassis
- Full tube frame constructed of high-strength impact resistant composite plastic, new chassis design moves battery tray to front for easier access and better weight distribution, new lower rails and skid plates are narrower for added clearance
- Suspension
- Multi link solid axle 4-link optimized to reduce axle steer and torque twist
- Drivetrain
- 4WD Shaft Drive
- Tire Type
- Licensed Nitto Grappler, aggressive large block tread design, foam inserts, Mounting Bead Diameter 1.9″ (48.2mm), Outer Diameter 4.7″ (119.4mm)
- Motor or Engine
- 540 size motor, 35T brush equipped, integrated cooling fan
- Speed Control
- Dynamite AE-5L 3S capable Forward/Reverse with drag brake, switchable between LiPo & NiMH batteries with a jumper, LED light controller with headlight/ taillight outputs
- Radio
- Spektrum FHSS 2.4GHz STX2 2-ch with 3-position throttle limiter, steering & throttle rate and trim adjustments, high torque (151 oz-in) water resistant, dual ball bearing steering servo
- Servos
- Tactic TSX45 high-torque metal gear dual ball bearing steering servo
- Batteries
- One 2-3S LiPo battery w/IC3 connector, or one 5-9 cell NiMH battery w/IC3 connector required
- Charger
- Compatible with selected battery
- Gear Pitch
- 32-Pitch
- Wheel Size
- 2.12″ (53.9mm) Diameter, 1.2″ (26mm) Width, 12mm Hex
- Kit/RTR
- RTR
- Shock Type
- Clear coated polished aluminum body oil-filled King shocks with precision machined pistons, pre-load tuning and ride height adjustable
- Body
- Molded polycarbonate with plastic grille and molded plastic inner fender wells
- Ball Bearings
- Full set included
- Assembly Time
- Less than 1 Hour
Reviews
There are no reviews yet.