Axial SCX10 III Jeep JT Gladiator RC Crawler, RTR, Gray, AXI03006T1
- 2.4GHz DX3 DSMR Spektrum radio provides advanced response, interference resistance, and, range, and is fully compatible with Spektrum Smart technology provided by the Spektrum Firma 40 ESC/Receiver
- 355mm wheelbase with longer frame rails and chassis allow for a more realistic Jeep JT Gladiator body
- Three-piece realistic Jeep JT Gladiator body that features injection-moulded scale parts including door handles, hood vents, bed rack, mirrors and more
- Transfer case cover and transmission housing protect the replica V8 engine, improve scale appearance and add forward-mounted weight
- Centred battery tray that accepts full-size NiMH or LiPo’s with side pod space to run smaller “shorty” LiPos
- Lock the rear axle from your transmitter with the DIG function which enables a tighter turning circle from front wheel drive
- Optional two-speed transmission that increases vehicle speed by around 40%
- Run DIG and two-speed transmission simultaneously with the addition of a micro servo and 4-channel receiver (sold separately)
- New AR45 Portal Axles have an offset front housing to add to the realistic looks, increase ground clearance and a universal that gives 45 degrees of steering
- Hypoid gears are included on the differential locker allowing for smaller size gears, improved gear reduction and reducing torque twist
- New O-ring material feature on the oil-filled shocks for a better seal and cap with bleed screw for easier rebuilds
- Stronger materials increase stiffness and durability
- Detailed interior and moulded driver that adds to the scale realism
- Simple body removal thanks to new rear body mounts
- 15kg, high torque metal geared waterproof servo allows you to drive confidently when the weather and conditions aren’t ideal
- Floor sides and inner fenders reduce visibility of internal components from the side
- Improved materials increase durability and stiffness while holding tighter tolerances to eliminate most “slop”.
- Metal stainless steel pivot balls at all suspension points increase durability and wear life for consistent handling.
- All-metal drive train components in the transmissions, portals and axle gears — with pinion gear included, the vehicle has 23 metal gears in total
- Remove and replace tyres with no glue with the 3-piece beadlock wheels
- Increased ground grip and clearance with taller officially licensed Nitto Trail Grappler tyres
- Improved suspension geometry reduces torque twist while allowing chassis fine-tuning
- Vehicle Battery (accepts standard and shorty packs)
- Compatible charger
- Type
- “Scale” 4×4 Crawler
- Completion Level
- Ready-to-Run
- Scale
- 1/10
- Length
- 22.25 in (565 mm)
- Width
- 9.25 in (234 mm)
- Height
- 9.5 in (241 mm)
- Weight
- 7 lb (3.175 kg)
- Ground Clearance
- 3 in (76.2 mm)
- Wheelbase
- 14 in (356 mm)
- Track
- 8.9 in (226 mm)
- Front Track
- 8.9 in (226 mm)
- Rear Track
- 8.9 in (226 mm)
- Chassis
- Adjustable Steel C-channel
- Suspension
- Multi-Link Solid Axle
- Shock Type
- Oil-Filled/Coil-Over Spring
- Drivetrain
- 4WD (locked front and rear)
- Differential
- Locked
- Wheel Type
- Injection Moulded 3-Piece Beadlock
- Wheel Diameter
- 1.9 in (48.3 mm)
- Wheel Width
- 1 in (25.5 mm)
- Tyre Compound
- R35 (sticky)
- Tyre Tread
- Nitto Trail Grappler M/T
- Tyre Diameter
- 4.7 in (119 mm)
- Motor Type
- Brushed
- Motor Size
- 540
- Pinion
- 14T
- Gear Pitch
- 32-Pitch
- Final Drive Ratio
- 45.6:1 Low / 31.3:1 High
- Speed Control Included
- Y
- Radio
- Spektrum
- Servos Included
- Y
- Body
- Polycarbonate
- Ball Bearings
- Complete Vehicle
- Experience Level
- Beginner
- Recommended Environment
- All-Terrain
- Is Assembly Required
- No
Reviews
There are no reviews yet.